»  ˹á  »  ѤҪԡ  »  Ը觫Թ  »  Դ  »  ҹǻ  »  ͹Թ/ʶҹ觫

СԹ

E-mail:
Password:
[ ѤҪԡ ]


Ū ҡ
ͤ,ôԵ ͧҧ
ͧѺ NOKIA
ͧѺ SAMSUNG
ͧѺ LG
ͧѺ SONY Eri
ͧѺ ͧչ
ͧѺ HTC
ͧѺ ٵͧ
ͧػó
ءҧǡѺ ⿹
Ū͹ʧ
ػóѾͶ
ػóѾͶ
ͧ¡Ш
Ш
ͺҧ⿹
شŷ
͡ػó
ԹҹҾ



Online: 4 user(s)

ͧ Ŵͤ Ū boot
Ѿ쵴ǹŴ



: 0522
Ipower X

IPower X Һ Դͧ Ѻ شͧ Ѿ
Ҥһ 1,950 1,850
: 0521
E-Mate X MOORC EMate 13 In 1

E-Mate X MOORC EMate 13 In 1 ش秤 Ѻ EMMC Ẻ 13 1 Ѻҹ ͧúٷ ¹ ...
Ҥһ 4,500 3,900
: 0520
JC PCIE

iPhoneSE,6S ,6SPlus,7,7Plus IPADpro ++ hard disk repair instrument
Ҥһ 16,500 15,500


Ǵ: ǻЪѹ
ͧ: ٹ ش Phoenix Service Software 2011 46 2 47246
´:

ٹ ش

Phoenix Service Software 2011 46 2 47246

 New version of Phoenix service software is available.  This  multi-protocol service software supports Nokia CDMA, GSM, TDMA, and  WCDMA products.

Main component versions in the release:

DK2 Driver Version 07.14.0.25
Nokia Connectivity Cable USB Driver Version 2011.48
Flash Update Package 2011.40.000
FLS-x Drivers Version 2.09.28
FUSE Connection Manager v 2011.43.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.38.3.46817

New Products added
RM-806, RM-813, RM-839

New features
New version of FUSE connection Manager
New version of Flash Update Package
New version of Product API
New version of Connectivity Cable Driver

Error Corrections & changes

Improvements to flash components, reducing the flashing time for USB Only concept devices (Genius Case#183882: Phoenix: N8 unusual phone behaviour during flashing)

Supported operating systems and user rights

Windows XP Service Pack 1 or higher
When installing Phoenix into Win XP you must have local admin rights.
When using in Win XP, user must have power user rights.
Windows 7 32 Bit version
Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

BULLETIN_CONTENT

1. CHANGE HISTORY

Version 1: 09.12.2011 Initial version

2. INTRODUCTION

New version of Phoenix service software is available.  This  multi-protocol service software supports Nokia CDMA, GSM, TDMA, and  WCDMA products.

  
Main component versions in the release:

DK2 Driver Version 07.14.0.25

  Nokia Connectivity Cable USB Driver Version 2011.48

  Flash Update Package 2011.40.000

  FLS-x Drivers Version 2.09.28

  FUSE Connection Manager v 2011.43.1

3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.38.3.46817

New Products added

  RM-806, RM-813, RM-839


  New features

  New version of FUSE connection Manager

  New version of Flash Update Package

  New version of Product API

  New version of Connectivity Cable Driver

Error Corrections & changes

  Improvements to flash components, reducing the flashing time for USB  Only concept devices (Genius Case#183882: Phoenix: N8 - unusual phone  behaviour during flashing)

Please note:


Energy Management Calibration should not be performed for products using  the "Quantum" engine (RM-689, RM-702, RM704 and other product using the  same engine)

 

Microsoft DOT.NET version 2 Service Pack 2 is now the minimum  requirement. Phoenix installation will check PC for the DOT.NET version  and update it automatically when PC has online connection. Without  online connection, old DOT.NET versions must be updated manually.

  New common data package location in use. Please see document SR1315 in KICS Information Center for further information.

  All Nokia Service Software Applications will use following location for product specific data:

  - Windows XP: Cocuments and SettingsAll UsersApplication DataNokiaPackages

  - Windows 7: Crogram DataNokiaPackages

  Please see articles SR1774 and 1786 for more information on the use  of Nokia Data Package manager - tool, and article SR1854 for more  information on the Nokia Service Application Manager Tool.

  During installation, Data Packages should be installed in these  directories, if they install to any other location by default. target  folder for local data packages can be changed in the installation wizard  manually

  This version contains the latest Tucson components.  Therefore it is  not necessary to use Tucson Add-On Installation Packages

  Before you start Phoenix or Care Suite installation to Windows 7 the  User Account Control (UAC) should be turned off from Windows Control  Panel settings.

  For more information concerning new options in "Firmware Update" -  menu and their use, Please see documents SR1313 and SR1659 in KICS  Information Center.

  Tucson operations combined with "flash" - option are now handled in  the same way as "refurbishment", which requires Mass Memory Content File  to be available. 

  Use of Flash option simultaneously with product code change for USB  Only phones is restricted. It is recommended to flash phone separately  with Firmware Update. Please refer to product specific instructions.

  Connection media to FLS-5 must be configured to be "USB_FBUS", after  FLS-4 support has been removed FBUS does not work anymore with FLS-5


4. KNOWN ERRORS & LIMITATIONS

FLS-5 drivers do not support 64 bit OS, so phones using FLS-5  /USB_FBUS connection can not be serviced in 64 bit operating systems

  Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.

  Flashing with setup FLS-5, SS-46 and product specific adapter is not  supported anymore. FLS-5 can be used with other product specific cables  and adapters, but not with SS-46 Interface Adapter.

  If you install old DCT-4 data packages, Flash Update Package File  installation path may be wrong. This is caused by very old DCT-4 data  packages which contain Flash Update Package and overwrite current  information during installation. If you experience problems when  updating FPS-x prommers, please check that Phoenix Prommer maintenance  is looking for the files from the correct location which is Crogram  FilesCommon FilesNokiaTssFlash. If not, Phoenix will show error  Update via ini file failed. In this case, select Update from that  Phoenix Prommer maintenance UI, browse to correct directory and  select fpsxupd.ini for all other prommers except the FPS-8.

  Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available.

  FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21  prommer with new HW version 11 has been released to correct this. Sales  pack code is 0089J83 , old HW version is not delivered anymore

  Please refer to product specific documents and instructions concerning the limitations of the RX-51 product

  RX-51 flashing does not work when CU-4 is used

  RX-51 Product Code changes work only without FLASH option, please flash phone separately

  When version 2010_12_8_42304 or newer with FUSE connection manager is  installed on top of older Phoenix versions, there may be an additional  delay of several minutes when you start Phoenix for the first time.  Please wait patiently; Phoenix will start after configuration is  finished.

  When using Data Package download functions with online connection,  download times may occasionally be long. This is not caused by Phoenix  (or Care Suite). The download speed from online servers is occasionally  is known to be slow, depending on how data is buffered on caching  servers.

  After you close Phoenix, it may not restart. To rectify this:

  - Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC

  It is not possible to program Mass Media Content file to some devices  over direct USB cable connection, due to the large size of the file.  For these models a feature called Media Check has been implemented.  When this type of product is connected to service software / PC via  direct USB cable the refurbishment option will be disabled. Please use a  flash prommer. Affected products using Media Check are: RM-122, RM-175,  RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472,  RM-484, RM-505, RM-555, RM-559

  To be able to use the help files in Windows 7 you need to install  Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate  WinHlp32.exe:

  -  Start Phoenix with online connection to Internet, select "Help" and  "Phoenix help". Click the "Microsoft Help and Support" website link.  Download WinHlp32 and install it.- Go to http://www.microsoft.com. Type "WinHlp32" to "Search Microsoft.com" - field. Locate  Windows Help program (WinHlp32.exe) for Windows 7 and install it

  When using flash prommers, only one connection type to one prommer is  allowed. Please use either NFPD USB or NFPD TCPIP connection to one  prommer, not both connections to same prommer


5. INSTALLATION

If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.

  Download Phoenix_Service_Software_2011_46_2_47246.exe application file to your computer (e.g. C:TEMP).

  Close all other programs.

  Disconnect all flash prommers and phones which may be connected to PC  via USB connection (reconnect them only after Phoenix installation has  been completed)

  Run Phoenix_Service_Software_2011_46_2_47246.exe and follow instructions on the screen to install Phoenix Service Software

  If your PC does not have Microsoft DOT.NET version 2 Service Pack 2  or newer, and PC is not connected to internet you must update DOT.NET  manually to the required version. When PC has online connection, DOT.NET  will be updated automatically.

  Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen

  If you are prompted to update any existing driver or file versions, select yes.

  Depending on the operating system, the PC may require rebooting.

  Allow Windows to register the Phoenix components.

  Open Phoenix, use FUSE Connection Manager to configure connections depending on the tools you use

  If you use CU-4, please pair the connection with service adapter by selecting pair with service adapter - option

  Update your prommer with the latest software included in this installation package.

  Install and use the latest available product specific data packages or flash bundles

 

6. Supported operating systems and user rights

Windows XP Service Pack 1 or higher

  When installing Phoenix into Win XP you must have local admin rights.

  When using in Win XP, user must have power user rights.

  Windows 7 32 Bit version

  Windows 7 64 Bit version (Please note that FLS-5 drivers do not  support Win 7 64 bit OS, therefore FLS-5 can not be used in this  operating system)


7. HW & Tool requirements:

Please refer to Documents SR998 and SR999 in KICS Information Center.

  For information on product specific data packages, tools and  instructions please refer to service manuals and technical bulletins.

  If you are installing this version of Phoenix on a new Imaged PC, and  you are using an FLS-4S or FLS-5 during the install, then install the  FLS-X drivers first.

  Separate installation package for FLS-5 drivers can be found attached  to this document together with Phoenix installation package

 

8. Reporting errors & ZIP Package Generator

You can use the ZIP Package Generate tool to create a ZIP package with necessary files to report an error.

  Launch Phoenix

  From main menu select Help -> Troubleshooting. The Zip Package Generator will be opened.

  In hours define period from which log files will be gathered in the ZIP package.

  Press Create ZIP - button and wait a while. When ZIP package is generated the content is displayed:

  Press Show Zip Folder- button to open Explorer window with folder containing the generated ZIP package:

  The generated ZIP package named like "Environment_20110223025156.ZIP"  is highlighted by default. The ZIP packages should be removed manually  when they are not needed any more.

  Attach the generated ZIP package  to the Genius Case.

  Brief step by step description about how the error can be reproduced should be attached to the Genius Case.

  Please also attach screenshot of error to the Genius Case.

  If Phoenix may create a file named "PhoenixMiniDump.dmp". If you are  prompted that this file has been created, please browse to the folder  shown on UI and attach the dump - file to your Genius case as well.


  For more information on the log files, please see document SR2169 "Log  Files and Error Reporting in Nokia Service Software " in KICS  Information Center

ǹŴ

áͧ dongle ҧ




ԹҷǢͧ
Octopus Box / ͧѺ LG
SE Tool 3 Box Fully LG sony úش / ͧѺ SONY Eri
Z3X BOX LG+SAMSUNG / ͧѺ SAMSUNG
Z3X BOX LG+SAMSUNG / ͧѺ LG
Z3X BOX SAMSUNG / ͧѺ SAMSUNG

12-01-2012 Views: 22820



˹á  |  Ը觫Թ  |  Դ  |  ҹǻ  |  ͹Թ/ʶҹ觫 |Admin
Copyright©2018 Thaimobileaccessories.com / Email:   by Click2u